MBD-X10SLM+-F | X10SLM+-F (Bulk Pack) |
Form Factor | microATX |
Dimensions | 9.6" x 9.6", (24.4cm x 24.4 cm) |
CPU | Intel Xeon processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors |
Single Socket H3 (LGA 1150) |
Memory Capacity | 4x 240-pin DDR3 DIMM sockets |
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) |
Memory Type | 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 8GB, 4GB, 2GB, 1GB |
Memory Voltage | 1.5V, 1.35V |
Error Detection | Corrects single-bit errors |
Detects double-bit errors (using ECC memory) |
Chipset | Intel C224 Express PCH |
SATA | SATA3 (6Gbps) w/ RAID 0, 1, 10, 5 |
SATA2 (3Gbps) w/ RAID 0, 1 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Nuvoton WPCM450 BMC |
Network Controllers | Intel i210AT Controllers |
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
1x Realtek RTL8211E PHY (dedicated IPMI) |
VGA | BMC integrated Aspeed AST2400 |
Serial ATA | 4x SATA3 (6Gbps) ports |
2x SATA2 (3Gbps) ports |
LAN | 2x Gigabit Ethernet LAN ports |
1x RJ45 Dedicated IPMI LAN port |
USB | 4x USB 3.0 ports (2 rear, 1 Type-A, 1 via header) |
6x USB 2.0 ports (2 rear, 4 via header) |
VGA | 1x VGA D-Sub Connector |
Serial Port / Header | 2x COM ports (1 rear, 1 header) |
DOM | SATA DOM (Disk on Module) power connector support |
TPM | 1x TPM Header |
Chassis (Optimized for X10SLM+-F )
|
1U Chassis: | SC813MTQ-441CB |
SC813MTQ-350CB |
SC813MTQ-R400CB |
SC512F-441B |
SC512F-350B |
SC811TQ-441B |
SC113MTQ-330CB |
SC113MTQ-R400CB |
2U Chassis: | SC823TQ-653LPB |
SC825MTQ-R700LPB |
SC213LT-600LPB |
SC213LT-563LPB |
3U Chassis: | SC833T-653B |
Mid/Mini Tower Chassis: | SC731i-300B |
SC733TQ-500B |
SC732D4-500B |
SC732D4-865B |
SC732D4-903B |
SC732D2-500B |
SC732D2-865B |
SC732D2-903B |
SC732i-865B |
SC732i-500B |
4U / Tower Chassis: | SC842TQ-865B |
SC842i-500B |
SC743TQ-865B-SQ |
SC745TQ-R920B |
SC745TQ-920B |
Important Chassis Notes | To support the new generation IntelXeon processor-based motherboards, Revision M chassis is recommended. |
PCI-Express | 1 (x8) PCI-E 3.0 in x16 slot |
1 (x8) PCI-E 3.0 slot |
1 (x4) PCI-E 2.0 in x8 slot |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | DMI (SMBIOS) 2.7 |
ACPI 5.0 |
USB Keyboard support |
Software | IPMI (Intelligent Platform Management Interface) v2.0 with KVM support |
SuperDoctor III |
Watch Dog |
NMI |
Power Configurations | ACPI / ACPM Power Management |
Main Switch Override Mechanism |
Power-on mode for AC power recovery |
Internal/External modem ring-on |
Voltage | Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
FAN | Total of five 4-pin fan headers supporting up to 5 fans |
5x fans with tachometer status monitoring |
Status monitor for speed control |
Status monitor for on/off control |
Support 3-pin fans (w/o speed control) |
Low noise fan speed control |
Pulse Width Modulated (PWM) fan connectors |
Temperature | Monitoring for CPU and chassis environment |
CPU thermal trip support |
FC temperature sensing logic |
Thermal Monitor 2 (TM2) support |
PECI |
LED | CPU / System Overheat LED |
+5V Standby alert LED |
Other Features | Chassis intrusion detection |
Chassis intrusion header |
Operating Temperature Range | 0°C ~ 60°C (32°F ~ 140°F) |
Non-Operating Temperature Range | -20°C ~ 60°C (-4°F ~ 140°F) |
Operating Relative Humidity Range | 10% ~ 85% (non-condensing) |
Non-Operating Relative Humidity Range | 10% ~ 95% (non-condensing) |