Product SKUs |
Код | |
Наименование | |
Physical Stats |
Form Factor | |
Dimensions | - 9.6" x 9.6", (24.4cm x 24.4 cm)
|
Processor/Cache |
CPU | - Intel© Xeon© processor E3-1200 v3/v4 and 4th Gen Core i3, Pentium, Celeron processors
- Single Socket H3 (LGA 1150)
|
System Memory |
Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type | - 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes | |
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On-Board Devices |
Chipset | |
SATA | - 3 (6Gbps) w/ RAID 0, 1
- 2 (3Gbps) w/ RAID 0, 1, 5, 10
|
SAS | - 2 (6Gbps) via LSI 2308
- SW RAID 0, 1, 1E, 10 support
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 2.0 with virtual media over LAN and KVM-over-LAN support
- Aspeed AST2400 with 10/100/1000M bps MAC
|
Network Controllers | - Intel© i210AT dual port GbE Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
VGA | - BMC integrated Aspeed AST2400
|
Input / Output |
Serial ATA | - 2x SATA3 (6Gbps) ports
- 4x SATA2 (3Gbps) ports
|
SAS | |
LAN | - 2x RJ45 Gigabit Ethernet ports
- 1x RJ45 Dedicated IPMI port
|
USB | - 2x 3.0 ports (1 via header, 1 Type-A)
- 6x 2.0 ports (4 rear, 2 via header)
|
VGA | |
Serial Port / Header | - 2x COM ports (1 rear, 1 header)
|
DOM | - SATA (Disk on Module) power connector support
|
TPM | |
Chassis (Optimized for X10SL7-F ) |
1U Chassis: | - SC113MTQ-R400CB
- SC813MTQ-441CB
- SC811TQ-441B
- SC113MTQ-330CB
- SC512F-350B
- SC512F-441B
- SC813MTQ-R400CB
- SC813MTQ-350CB
|
2U Chassis: | - SC825MTQ-R700LPB
- SC823TQ-653LPB
- SC213LT-563LPB
- SC213LT-600LPB
|
3U Chassis: | |
SuperServer(s) with X10SL7-F |
Model(s) | |
Expansion Slots |
PCI-Express | - 1x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 2.0 x4 (in x8) slot
|
System BIOS |
BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features | - DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
- SuperDoctor© III
- Watch Dog
- NMI
|
Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
PC Health Monitoring |
Voltage | - +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset s.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN | - Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat
- +5V Standby alert
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
Operating Environment |
Operating Temperature Range | - 0'C ~ 50'C (32'F ~ 122'F)
|
Non-Operating Temperature Range | - -40'C ~ 70'C (-40'F ~ 158'F)
|
Operating Relative Humidity Range | - 8% ~ 90% (non-condensing)
|
Non-Operating Relative Humidity Range | - 5% ~ 95% (non-condensing)
|